geometry settings for rover 75 v8 fitted with vhs handling kit?

;)Just go to Brian and you won't have to worry about metric;)

but just in case

Front camber -1deg10' +-0deg 15' = 1.16 degrees + 0.25 degrees
Front toe total +0deg 12' +-0deg 6' = 0.2 degrees + 0.1 degrees


rear camber -2deg 05' +-0deg 15 '= 2.08 degrees + 0.15 degrees
rear toe total 0deg 36' +- 0deg 6' = 0.6 degrees + 0.1 degrees

Thrust 0deg 00' +-0deg 6' = 0 degrees + 0.1 degrees

Quote:

---

Originally Posted by VMax1000

I thought the settings for the kit would be the same..............

---

Here are the settings I received from VHS when I got the kit for my car.

Front:
Total toe (alignment): 15 min in +/- 5 min
Camber: Negative 1 deg 45 min (Front camber is not normally adjustable)
Caster: 3 deg 35 min (Not normally adjustable)
Rear:
Total toe (alignment): 36 min in
Camber: 2 deg 40 min (This is adjustable on the rear but should not require adjustment.)

With the alignment set as shown, tyre wear should be as the standard set-up although this will vary depending on driving style. :rolleyes:

Hope this is of help :thumb

Quote:

---

Originally Posted by Ajay

Here are the settings I received from VHS when I got the kit for my car.

Front:
Total toe (alignment): 15 min in +/- 5 min
Camber: Negative 1 deg 45 min (Front camber is not normally adjustable)
Caster: 3 deg 35 min (Not normally adjustable)
Rear:
Total toe (alignment): 36 min in
Camber: 2 deg 40 min (This is adjustable on the rear but should not require adjustment.)

With the alignment set as shown, tyre wear should be as the standard set-up although this will vary depending on driving style. :rolleyes:

Hope this is of help :thumb

---

Here you go for the conversion http://zonalandeducation.com/mmts/tr.../degMinSec.htm