hi guys i fitted my rover 75 v8 with the vhs handling kit this afternoon
and just wondering if any of you kind gents woukd have the geometry settings in METRIC !
so i can get a four wheell geometry done,my mechanic said he needs the settings in metric
thanks again jimmie biggam,elderslie scotland
If you're in Elderslie, you are an hour or so away from Brian. Why not go there?Quote:
Originally Posted by jimmie
PS. Contact Tim for the form to become a greenie and access all the info available
For now here's the setting (from Brian)
"Scooter posted these on 260s so thanks Scooter.
Front camber -1deg10' +-0deg 15'
Front toe total +0deg 12' +-0deg 6'
rear camber -2deg 05' +-0deg 15'
rear toe total 0deg 36' +- 0deg 6'
Thrust 0deg 00' +-0deg 6'
Tyre pressures Front 34 psi Rear 36 psi
Checked with a full tank of fuel, to correct for fuel level add to boot in kg.
3/4 full add 10 kg
1/2 full add 20 kg
1/4 full add 30 kg
empty add 40 kg
Note 1 litre of water weighs 1 kg the weight should be placed as far forward as possible
herman
thanks for your quick reply as yet i cant seem to download the questionaire and do want to become a full member
thanks jimmie biggam
PM Tim your email address and he'll send you a new questionnaire
I'm sure Tim will sort it soon! :cool:Quote:
Originally Posted by jimmie
Try reading it again, Colin. ;)Quote:
Originally Posted by colintf
I don't think these are the settings for the VHS kit. I've got them somewhere, I'll try and dig the them out and post them.Quote:
Originally Posted by VMax1000
oh B*ggar! Thanks for pointing out my mistake.Quote:
Originally Posted by bernard lpg
:cool:
I thought the settings for the kit would be the same..............Quote:
Originally Posted by Ajay
allan at vhs said keep the rear settings as standard,but adjust the front 10 minutes out, i think ?but its metric readings my mechanic wants
jimmie