For sale Cold air induction kit

I bought this kit from US ebay. It consists of powder coated pipes, cone filter, and various rubber couplings. Ive made an adaptor for the MAF, and the filter sits in the space vacated by the original set up, the 90 degree pipe is held to the body with stainless jubilee clips. I havent used the longer pipe, but with some tweaks this is intended to replace the long flexible pipe from the engine to the MAF.


http://i128.photobucket.com/albums/p...2/PICT2912.jpg

http://i128.photobucket.com/albums/p...2/PICT2913.jpg

http://i128.photobucket.com/albums/p...2/PICT2910.jpg

http://i128.photobucket.com/albums/p...2/PICT2901.jpg

It gives a good but not too intrusive induction growl. Im looking for £50 plus postage, or collect from near M6 J28

I may be interested! YHM

you will need a larger air filter if you want to increase the HP.

Black Olive, I'm in the process of a very similar setup using universal Pipes Hose's etc to get the filter in the same possition as per your pic above.
(See my BHP MODS) post. I had a tiny filter on the end of the Version 1 fitment and it deffo restricts the power. I'm hoping that the Larger filter I have got will sit in the original place like yours when version 2 is finished. I also took out the blanking plate (Late Mk1) under the indicator and put some Ducting in to the filter too. But version 1 the filter was just drivers side of the rad i.e. engine bay side of the gap passing through to the original place. So all being well with the new larger filter and the ducting sat in the original place I'll see an even better improvment!
Fingers x'd anyway!