Wanted - Black Oak, 5 holes switch panel.

I am after a 5 hole black oak switch front if anyone has one or knows anywhere that has one. Many thx JB.

If you've got a lesser hole one, just get a dremmel out and add the missing ones.

The trick is to get any old 5 hole one put a strip of masking tape over it and put them back to back, line up and mark up the missing hole(s)

Quote:

---

Originally Posted by greeners

If you've got a lesser hole one, just get a dremmel out and add the missing ones.

The trick is to get any old 5 hole one put a strip of masking tape over it and put them back to back, line up and mark up the missing hole(s)

---

Weren't the holes already marked on the back, even if you only have a 2 hole one, but just not cut out?

Quote:

---

Originally Posted by Herman

Weren't the holes already marked on the back, even if you only have a 2 hole one, but just not cut out?

---

No the marks on the back are much bigger then the switch .....

Quote:

---

Originally Posted by greeners

No the marks on the back are much bigger then the switch .....

---

Cut well inside the lines :)

Thanks for your replies. I have just bought two blanks to attempt to cut the holes in. I have a 5 hole one to use as a pattern. Will let you know how it goes. Thx again. JB