Roush supercharger belt routing

Printable View

07-06-2012, 07:50 PM
mgnumber49

Roush supercharger belt routing

Hi,Has anyone got any pictures of the belt routing please.Many Thanks Karl
07-06-2012, 09:04 PM
Bainzi

2 Attachment(s)

Here you go, The first one shows the complete front pulley system, the second the pulleys (minus Aircon pulley bottom left) However, where the belt runs is had to see, ive just been out to the car but its peeing down. i need to take some time to confirm where the belt runs for you.

Regards

Nigel

PS WHY ????? lol
07-06-2012, 10:43 PM
re-tread

To save you getting wet Nige, its on page 40 of the Supercharger install manual and repeated here.

https://www.two-sixties.co.uk/galler...lt_Routing.jpg

Sorry the quality is poor but you can just about make out the route.
07-06-2012, 11:37 PM
Bainzi

Thanks Dave.

Are you going to the Leeds Cruise again this weekend? I plan to but not if the weathers crap!!!
07-06-2012, 11:46 PM
re-tread

I can't make it this month Nige, already a fully booked weekend.
07-06-2012, 11:49 PM
Bainzi

No Problem :-) have a good weekend.
08-06-2012, 08:04 PM
mgnumber49

Hi,Firstly Thanks to Nigel and Dave,Secondly Why???? Theres going to be another Roush 385 when I have worked out which bits I have missing and make them,unless someone has a stash of Roush bits for sale!!!! Karl Green VIN 49
08-06-2012, 08:07 PM
mgnumber49

Spark Plugs

Hi,Sorry forgot to ask,What spark plugs are needed for the supercharged setup and any Idea of the belt sizes please.Many Thanks Karl Green Vin 49
08-06-2012, 09:14 PM
colintf

Quote:

Originally Posted by mgnumber49

Hi,Firstly Thanks to Nigel and Dave,Secondly Why???? Theres going to be another Roush 385 when I have worked out which bits I have missing and make them,unless someone has a stash of Roush bits for sale!!!! Karl Green VIN 49

good luck with your project Karl and #049 :cool:
08-06-2012, 11:41 PM
re-tread

Quote:

Originally Posted by mgnumber49

Hi,Firstly Thanks to Nigel and Dave,Secondly Why???? Theres going to be another Roush 385 when I have worked out which bits I have missing and make them,unless someone has a stash of Roush bits for sale!!!! Karl Green VIN 49

Karl Some information of the Stage 3 Roush here. About half way down the page is a link for the installation manual which gives plenty of info such as parts required, belt sizes etc. Take care on the supercharger belt as the length may depend on the location of the alternator as there are at least a couple of options. The plugs I'm using are NGK TR6 4177 which are recommended on the various forums.