PDA

View Full Version : ecu wanted for svr engine 5 litre 32 valve



jimmie
18-07-2011, 12:11 AM
hi guys ive bought a 5 ltr svr 32 valve to go into the lhd dtm shell i bought from tony bubble,ive got the engine wiring loom but need an mg svr ecu,
any suggestions or thoughts would be really appreciated
jimmie biggam

greeners
18-07-2011, 08:26 AM
GT Racing Or Will Riley are probably the best bets, or may be even Brian (Scooter)

re-tread
19-07-2011, 12:41 AM
I bought a spare ECU from Will Riley when I got my Roush engine from him. He said it would be OK for my set-up with a remap. I checked it at the time and I'm sure it was listed as for the 32v engine. I'll have a look tomorrow and will let you know as it is still in my garage unused.

jimmie
20-07-2011, 07:56 PM
retread ,thats great news,looking forward to hear from you
jimmie biggam

re-tread
20-07-2011, 08:50 PM
Sorry Jimmie but I've just had a look at the code on the ECU and it is for the 4.6 4V engine and not the 5.0 4V unit.

jimmie
21-07-2011, 07:40 PM
retread ,thanks for your reply,wouldnt the 4.6 32v ecu be fine as its a 4.6 engine reworked to a 5litre,it still says x power 4.6 ltr on the engine badge,im sure it would be fine with a remap ?
look forward for your reply, jimmie biggam

re-tread
22-07-2011, 01:33 AM
You have PM

v8fangio
03-08-2011, 08:47 AM
5 litre is usually a 4.6 with 3.7 bore or 3.75 crank

tomcat22
03-04-2012, 09:26 AM
and the firing sequence is different