PDA

View Full Version : tecnical grey cup holder blanking plate.



gjt100
26-03-2011, 08:44 AM
Hi. Does anyone have a technical grey cup holder blanking plate availabe (driver side)? Taking my LPG out in a few weeks and want to replace as mine will have a hole when i take out the fuel button.

Thanks

woolleysox
26-03-2011, 04:36 PM
Hi Graham if you are at Brookland on the 10th one in the car for you. :):) If not pm me your address and I will bung it in the post for you

Rob

rls
26-03-2011, 09:13 PM
Why are you removing the LPG, does it still work ??

gjt100
27-03-2011, 08:36 PM
Hi Graham if you are at Brookland on the 10th one in the car for you. :):) If not pm me your address and I will bung it in the post for you

Rob

Hi Rob,

Thanks very much. Unfortunalty im not going to make it to Brooklands as its my Birthday on the 10th and Wedding anniversay on the 11th, so just too much going on.

I will PM you, Thanks once again.

Regarding the LPG, Yes having problems again and i have no desire to try and fix this time. Will be taking out and bunging on ebay in a few weeks. I took it to an LPG specialist in Plymouth who said the system seems to be fine but just not suitable for a large engined car so struggling to deliver enough fuel.

Regards

Graham

woolleysox
27-03-2011, 09:59 PM
Hi Graham pm sent re the cover.

Bernard LPG has a 260 runing on LPG and he does not appear to have any problems,

Rob



Hi Rob,

Thanks very much. Unfortunalty im not going to make it to Brooklands as its my Birthday on the 10th and Wedding anniversay on the 11th, so just too much going on.

I will PM you, Thanks once again.

Regarding the LPG, Yes having problems again and i have no desire to try and fix this time. Will be taking out and bunging on ebay in a few weeks. I took it to an LPG specialist in Plymouth who said the system seems to be fine but just not suitable for a large engined car so struggling to deliver enough fuel.

Regards

Graham

gjt100
07-04-2011, 04:36 PM
Hi,

Although Rob was kind enough to give me a blanking plate i have since found out there are two versions of the technical grey. Robs unfortunatly was Mk1 (glossy). I am after a Mk2 (matt).

If anyone has one has a spare, please let me know and im sure we can come to some agreement.

Many thanks

Graham

greeners
07-04-2011, 04:42 PM
Hi,

Although Rob was kind enough to give me a blanking plate i have since found out there are two versions of the technical grey. Robs unfortunatly was Mk1 (glossy). I am after a Mk2 (matt).




Shiney and smooth is from MKI cars called Rhodium
Matt and rough is from MKII cars and called Technical