View Full Version : alloy valve covers
LINDEN CAHILL
14-03-2011, 10:08 PM
hi
i am wanting a pair of alloy valve covers for the v8, hope fully without dealing in the u.s.a
thanks
Coasting
14-03-2011, 10:20 PM
Do you mean rocker covers or tyre valve caps...:D
LINDEN CAHILL
14-03-2011, 10:32 PM
Do you mean rocker covers or tyre valve caps...:D
rocker covers to us english,valve covers in u.s.a sorry for not making it clear;)
Coasting
14-03-2011, 10:45 PM
Funnilly enough I am looking for a set of alloy valve caps for mine!
X5POWER
14-03-2011, 10:49 PM
Hi
I got mine from dreadnought in Scotland,but i have asked them for a price for my new 260 but they have not got back to me yet.I will let you know when i have more info
steve
Your still blue Steve :D
Welcome to the Two-Sixties
Hi
I got mine from dreadnought in Scotland,but i have asked them for a price for my new 260 but they have not got back to me yet.I will let you know when i have more info
steve
X5POWER
14-03-2011, 11:47 PM
Hi Tim
I sold my baby i can not live without a v8 so i have just bought a new one collect it on sat. i can not wait
Coasting
14-03-2011, 11:48 PM
4 days...4 days!
Did you really sell a baby?!
X5POWER
14-03-2011, 11:49 PM
it felt like it matey !!!
AndyG
14-03-2011, 11:53 PM
so i have just bought a new one collect it on sat. i can not wait
Welcome :D
WhenGreen:
List of 001 to 883 (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?t=5539)
Estates (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?t=5493)
Supercharged Cars (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?t=5460)
Locations (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?t=7079)
Car Names (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?t=7128)
Rolling Road Results (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?t=7475)
The SHOP (https://www.two-sixties.co.uk/mgoc260/html/f0rum/forumdisplay.php?f=121)
Phil Evans
14-03-2011, 11:59 PM
The valve covers can be very difficult to fit, due to clearance in the engine bay. :head
X5POWER
15-03-2011, 12:00 AM
Thanks Andy
I am saving up for a supercharger now, after you have had a 260 with a supercharger on it nothing else will do will it !!!
LINDEN CAHILL
15-03-2011, 12:00 AM
what about the rocker covers:offt
Coasting
15-03-2011, 12:01 AM
what about the rocker covers:offt
You still want those?? :go
LINDEN CAHILL
15-03-2011, 12:06 AM
very funny,you lot make me laugh sometimes:D;)
X5POWER
15-03-2011, 12:37 AM
Sorry for going of topic.
I am new to forums,i will learn. but your alloy rocker covers i bought a pair around 3 years ago and i think they cost around £300 for the pair but the dollar was a lot more to the pound.
Steve
ksilver
15-03-2011, 09:10 AM
what about the rocker covers:offt
Ask on the Mustang Owners GB (http://www.mocgb.net/forums/forum.php) site, I have seen them pop up a couple of times over there.
wraith01mg
15-03-2011, 09:24 AM
Welcome along by the way x5power. Exactly how hard are they to fit?
X5POWER
15-03-2011, 09:33 AM
Thanks Chris
I was under the impression that you have to take engine mounts out, but someone told me at a show that you can take the bulkhead plate off but i am not sure.
regards Steve
wraith01mg
15-03-2011, 09:40 AM
That sounds like the same trick as changing the rear spark plugs on the v6 car. Fiddly but way easier than removing mounts. Cheers Steve I'll look into it.
LINDEN CAHILL
15-03-2011, 09:48 AM
yes if you take out the bulkhead plate then they will come out,the plate can be a fidley job though.
i removed then of my old engine this way:)
X5POWER
15-03-2011, 09:48 AM
Have you seen the pics of my old car on 75/ZT forum site? it shows rocker covers
steve
LINDEN CAHILL
15-03-2011, 09:49 AM
Sorry for going of topic.
I am new to forums,i will learn. but your alloy rocker covers i bought a pair around 3 years ago and i think they cost around £300 for the pair but the dollar was a lot more to the pound.
Steve
no worries mate,i also have made mistakes on here,it is quite easy to do so;)
wraith01mg
15-03-2011, 09:53 AM
yes if you take out the bulkhead plate then they will come out,the plate can be a fidley job though.
i removed then of my old engine this way:)
Cheers for the confirmation. Yes if they are like the v6 ones then they are a pain in the buttocks. Anyone done a full plug change in a v6? Cos I can tell you it's an arse stupid job. :offt
colintf
15-03-2011, 01:14 PM
I think Wyn (Eurorover) fitted some to his
:cool:
try real steel in Uxbridge
http://www.realsteel.co.uk/
do loads of stuff like that incl for the Ford modular V8
GeoffW
15-03-2011, 11:11 PM
Yes Wyn fitted a set himself , I think he nearly received an asbo as the launguage was so bad, yes it was difficult not sure where he bought them from
eurorover
17-03-2011, 10:18 PM
Yes I fitted a set myself. got mine from summit racing there is a thread on here somwhere. be careful when ordering different covers for the V8i.e number of bolts and the oil filler side.
ColinE
17-03-2011, 10:21 PM
Yes I fitted a set myself. got mine from summit racing there is a thread on here somwhere. be careful when ordering different covers for the V8i.e number of bolts and the oil filler side.
But fitting them was a piece of cake, or I think that's what you said????????
eurorover
17-03-2011, 10:23 PM
I can think of easier things to fit and im sure cake did not come into it
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.