PDA

View Full Version : Master cylinder



Simon levett
19-03-2021, 07:10 AM
Can I get a new Master cylinder anywhere? Are they unique to the 260?
servo full of brake fluid!

David
19-03-2021, 10:17 AM
Can I get a new Master cylinder anywhere? Are they unique to the 260?
servo full of brake fluid!
Talk to Rimmers about it. I'm pretty sure that when they did list brake parts on their 260/R75V8 pages (they no longer list any specific 260/75V8 brake parts !), the part shown was the same as the ZT 190 or R75V6 (2.5) /Tourers, namely SJC000080. They still list that part, but only on their brake pages for 'MG ZT' and 'Rover 75', where they state it to be suitable for "all models". Probably a good idea to ask though, as I say.
https://rimmerbros.com/Item--i-SJC000080

David

MartinSClark
19-03-2021, 02:40 PM
Hi Discount Motor Spares have them for under 50pounds speak to Matt https://www.dmgrs.co.uk/

David
19-03-2021, 02:51 PM
Hi Discount Motor Spares have them for under 50pounds speak to Matt https://www.dmgrs.co.uk/
Got a specific link or that, Martin? All master cylinders for ZT/75 there appear to be clutch master cylinders, and searching on SJC000080 delivers an MG TF unit with a different number.


David

DomT101
19-03-2021, 05:31 PM
https://www.dmgrs.co.uk/products/mg-zt260-v8-clutch-master-cylinder-stc000320-genuine-ap-delphi?_pos=11&_sid=c5b6dc187&_ss=r

think this is the one Martin was saying about, but it?s for the clutch

SCP440
19-03-2021, 08:11 PM
That is a clutch master cylinder. He needs a brake master cylinder sadly.

Steve

David
19-03-2021, 08:50 PM
I guess confirming that SJC000080 (https://rimmerbros.com/Item--i-SJC000080) is actually the correct one (or at least fits), is all that is needed.
Rimmers and others appear to have that available.
Anybody know for sure?

David

Simon levett
23-03-2021, 07:52 PM
Hopefully one turning up from Rimmers tomorrow����

David
23-03-2021, 07:59 PM
Hopefully one turning up from Rimmers tomorrow����
Do they confirm that SJC000080 (https://rimmerbros.com/Item--i-SJC000080) is actually the correct one, Simon? Good to know if it is.

David