PDA

View Full Version : Rear Discs!



The Gas Man
21-03-2015, 09:07 PM
Hi. Please excuse me if this is a known error, But apparently I'm your newest member!

See link below for 260 rear disc prices.

http://www.eurocarparts.com/brake-disc

colintf
21-03-2015, 09:19 PM
Hi. Please excuse me if this is a known error, But apparently I'm your newest member!

See link below for 260 rear disc prices.

http://www.eurocarparts.com/brake-disc

WRONG DISCS I believe :(

but ut hi and welcome :)

Nich
21-03-2015, 09:46 PM
Accurate information, rear discs available from the Club Shop.

Front discs, same as ZT190...............325mm
Rear discs, unique to 260..................332mm and include 190mm hand brake drum (so don't look for BMW equivelant. There are none)

Info in the INDEX from Herman.

Nich.

AndyG
21-03-2015, 09:47 PM
...................

Salut.

Rear discs are a challenge, most of the on line companies are wrong in their listings. but they are available through the Club Shop.

Have you got a 260/R75V8 ?

If you have? you need to go green and get full access to the forum and spares etc.

The Gas Man
21-03-2015, 10:00 PM
On the verge of buying, just doing groundwork!

AndyG
21-03-2015, 10:02 PM
On the verge of buying, just doing groundwork!

No problems, Just challenges with ownership ;)

All parts are available or modifiable.

Ken B
21-03-2015, 10:06 PM
Hi and welcome to the twosixties, rear discs are only available from the 260's club shop, all the rear discs that are offered by companies selling rears for our cars are wrong. Ive checked time and time again once you get the spec they are all to small and to thin. The club discs are superb along with the people that supply them...

George
22-03-2015, 04:07 AM
I think the rear discs can be skimmed once if they remain within tolerances? Not too expensive

Herman
22-03-2015, 10:17 AM
I think the rear discs can be skimmed once if they remain within tolerances? Not too expensive

All depends on how far they're worn already. Think they start at 26mm new so wouldn't go lower than 24.5mm

Ken B
22-03-2015, 01:14 PM
It was rust that did my original discs in. The inside face and especialy the handbrake drum...