PDA

View Full Version : Coil on plugs



Swanny
11-11-2013, 09:08 AM
Hi all,

well i finally bought a v8 :-) :-)

after driving a couple of hundred miles perfectly 051 started to hesitate and struggle under load. limped to Austins and Nick diagnosed a dodgy coil. he also suspected that another may be about to follow it.

He recommended the MSD blaster coil on plugs as a good upgrade from standard but they are quite expensive. So i guess i have a few questions relating to this:

how many of you use the MSD product? is it worth the upgrade? do you know of any good sources in the UK for these? all the ones i could see were in the states.

if anyone has upgraded does anyone have a few second hand standard ones they'd like to sell me?

or does anyone have a preferred source for stock coils?

thanks

paul

colintf
11-11-2013, 09:15 AM
Hi and welcome
you could try Brian at Dreadnought for the std COPs

:cool:

greeners
11-11-2013, 09:17 AM
Paul

If you look on ebay, there are a few pattern ones available, last one i Bought was £30 and was fine. It's the same across most of the Ford V8 range..

greeners
11-11-2013, 09:20 AM
http://www.ebay.co.uk/itm/ROVER-75-SALOON-4-6-V8-2004-TO-2005-IGNITION-COIL-12496-/181219085788?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2a317fcddc

First one I came across

bernard lpg
11-11-2013, 09:44 AM
Both Max260 andd I have fitted Accel COPs to our cars. Obtained from Amazon and are not expensive.

Swanny
11-11-2013, 03:00 PM
i think i'll be going after market, probably for the ones on ebay. dreadnought and rimmer brothers want £143 +vat each for oem ones.

scooter
11-11-2013, 03:41 PM
Buyer beware you get what you pay for if the unit does not match up with the same electrical loads/impedance you can burn out the drivers in the ecu.

Herman
11-11-2013, 05:04 PM
i think i'll be going after market, probably for the ones on ebay. dreadnought and rimmer brothers want £143 +vat each for oem ones.

Some alternatives here http://www.rockauto.com/catalog/x,carcode,1415089,parttype,7060

BigA
11-11-2013, 05:05 PM
I have some standards taken off the car at 17000 miles but I don't know what to ask for them - yet. I'll do a bit of research and find out what's reasonable if you like

Where are you located?

AndyG
11-11-2013, 07:20 PM
how many of you use the MSD product?

is it worth the upgrade?

do you know of any good sources in the UK for these?

Yes, I have them.

I believe so. Difficult to test. More bang = more power.

Brian at Dreadnought.


Mike (zan110) ordered some low priced ones from China... They never arrived.

AndyG
11-11-2013, 11:35 PM
Swanny (https://www.two-sixties.co.uk/mgoc260/html/f0rum/member.php?29012-Swanny)

Which car have you? (last 3 of the VIN)

WELCOME :D

(Lists of your brothers and sisters)

List of 001 to 883 (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?t=5539)

Pictures of cars in VIN order (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?12340-Photographs-of-Cars-Ordered-by-VIN)
..To add your car (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?12302-Car-Photo-Vin-order-thread)

Car Names (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?t=7128)

Estates (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?t=5493)
Supercharged Cars (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?t=5460)

Locations (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?t=7079)
Location Map (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?9459-NO-COST-CAR-MAPPING-Clickable-map-to-set-your-location)

Rolling Road Results (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?t=7475)

Past & Future Events (https://www.two-sixties.co.uk/mgoc260/html/f0rum/forumdisplay.php?58-Two-Sixties-Events)

Articles about our cars (https://www.two-sixties.co.uk/mgoc260/html/f0rum/forumdisplay.php?153-Articles-about-our-cars)

Technical Index (https://www.two-sixties.co.uk/mgoc260/html/f0rum/forumdisplay.php?164-Index)

The SHOP (https://www.two-sixties.co.uk/mgoc260/html/f0rum/forumdisplay.php?f=121)

List of possible 260s Meetings (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?12486-2013-MG-etc-Diary-Dates&p=132262#post132262)

MG ZT260 FAQ (http://www.spunagain.co.uk/ZT260page.html) (in the Public View)

Two-sixties Blog (http://two-sixties-blog.com/)

Items for sale 260 members only (https://www.two-sixties.co.uk/mgoc260/html/f0rum/forumdisplay.php?151-Items-for-sale-to-Two-Sixties-members-only)
Items For Sale in Public Section (https://www.two-sixties.co.uk/mgoc260/html/f0rum/forumdisplay.php?90-Items-for-sale)
List of MG ZT/ZTT/75 V8s For Sale (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?13272-List-of-MG-ZT-ZTT-75-V8s-FOR-SALE)

BTCC Media Day (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?10763-BTCC-Media-Day-(Public-Thread))(in the Public Section)
BTCC 2012 (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?10843-BTCC-Brands-Hatch-1st-April-2012-Photos) (in the Public Section)
BTCC 2013 (https://www.two-sixties.co.uk/mgoc260/html/f0rum/showthread.php?12139-Thursday-21st-MArch-13-2013-BTCC-Media-Day-at-Donington-Park&p=128406#post128406)

Nich
12-11-2013, 08:50 AM
051 I believe Andy.

Nich.

Swanny
12-11-2013, 09:00 AM
yes 051. i did check with dreadnought but they told me in an email that they only used standard oem parts.

AndyG
12-11-2013, 01:00 PM
051 I believe Andy.
Nich.

yes 051.

Thank You, I will update lists (when I can)

gignwah11
11-01-2014, 09:53 PM
So which ones did you buy in the end?