PDA

View Full Version : Wanted - Black Oak, 5 holes switch panel.



My V8
03-02-2013, 03:51 PM
I am after a 5 hole black oak switch front if anyone has one or knows anywhere that has one. Many thx JB.

greeners
05-02-2013, 03:13 PM
If you've got a lesser hole one, just get a dremmel out and add the missing ones.

The trick is to get any old 5 hole one put a strip of masking tape over it and put them back to back, line up and mark up the missing hole(s)

Herman
05-02-2013, 06:34 PM
If you've got a lesser hole one, just get a dremmel out and add the missing ones.

The trick is to get any old 5 hole one put a strip of masking tape over it and put them back to back, line up and mark up the missing hole(s)

Weren't the holes already marked on the back, even if you only have a 2 hole one, but just not cut out?

greeners
05-02-2013, 06:46 PM
Weren't the holes already marked on the back, even if you only have a 2 hole one, but just not cut out?

No the marks on the back are much bigger then the switch .....

Herman
05-02-2013, 06:51 PM
No the marks on the back are much bigger then the switch .....

Cut well inside the lines :)

My V8
06-02-2013, 11:46 PM
Thanks for your replies. I have just bought two blanks to attempt to cut the holes in. I have a 5 hole one to use as a pattern. Will let you know how it goes. Thx again. JB