PDA

View Full Version : Belt Tensioner REQUIRED.



ashton
23-05-2012, 10:54 PM
THINK ITS PART NUMBER "Motorcraft BT-68 Belt Tensioner".

MINE IS SQUEALING AS THE SPRING IS WORN.

CAN GET ONE FROM THE STATES BUT CHECKING TO SEE IF ANYONE HAS ONE.

colintf
24-05-2012, 07:50 AM
ask Brian at Dreadnought :cool:

tomcat22
24-05-2012, 09:55 AM
smc still has some in stock

2V8s
24-05-2012, 01:27 PM
yeah and real steel may have them.

Keith
25-05-2012, 10:38 PM
I bought tensioner and both idlers from Rock auto inc P&P it was cheaper than buying in the UK and they arrived in a week

Herman
25-05-2012, 10:49 PM
I bought tensioner and both idlers from Rock auto inc P&P it was cheaper than buying in the UK and they arrived in a week

I didn't want to mention that in case people would think I'm on commission :)

ColinE
26-05-2012, 09:39 PM
I didn't want to mention that in case people would think I'm on commission :)

Oh you're not - I sort of assumed you were :-)

jenksman
18-04-2013, 08:48 AM
I bought tensioner and both idlers from Rock auto inc P&P it was cheaper than buying in the UK and they arrived in a week

Sorry to resurrect this one but do you have the Rock Auto part numbers
Dave

Nich
18-04-2013, 10:44 AM
Here you go Dave:

5054

5055

Nich.

AndyG
18-04-2013, 02:11 PM
Are you sure it is the spring and it dosen't just need dropping down a notch (That worked with mine!)

jenksman
18-04-2013, 03:03 PM
Are you sure it is the spring and it dosen't just need dropping down a notch (That worked with mine!)

Not sure Andy
Also not sure if the tensioner above will fit a ZT400
All I know is belt squeaks like a banshee on start up and does not appear to be very tight
Dave

AndyG
18-04-2013, 03:30 PM
Not sure Andy
Also not sure if the tensioner above will fit a ZT400
All I know is belt squeaks like a banshee on start up and does not appear to be very tight
Dave

Mine was the same, Nick just dropped it a couple of holes on the plate, It's been fine since, worth a try.

a 10 minute job.

Nich
18-04-2013, 04:39 PM
Sorry to resurrect this one but do you have the Rock Auto part numbers
Dave



........
Also not sure if the tensioner above will fit a ZT400
Dave

I thought that's what you wanted?????????

Hence my post.

Nich.

jenksman
18-04-2013, 06:55 PM
I thought that's what you wanted?????????

Hence my post.

Nich.
Thanks Nich
Yes I wanted the part number. Subsequently AndyG suggested I need only adjust idler pulleys. Thanks Andy.
Brian has confirmed this so I will give it a go
Am now on my third belt
Dave

AndyG
18-04-2013, 10:12 PM
I hope it works for you.


I am supprised at the 3rd belt, maybe it is slopping around and wearing?

.

jenksman
18-04-2013, 10:28 PM
I hope it works for you.


I am supprised at the 3rd belt, maybe it is slopping around and wearing?

.

Aircon compressor pulley seized.
Dave

AndyG
18-04-2013, 10:31 PM
Aircon compressor pulley seized.
Dave

Opps.........

scooter
22-04-2013, 09:10 AM
I still use my car for long term durability testing. It is in its second belt at 90+K miles. The front plate mount on the blower has many pulley positions on it to facilitate belt adjustment to take up any differences in belt and spring tensioner production tolerances.