PDA

View Full Version : Bonnet wont Open



MIKE ZT-T
19-03-2012, 01:38 PM
Hope someone can help me, Bonnet on my V8 will not open, the bonnet catch has become floppy when pulled, the cable is still attached so I don't think it is broken, I have looked at my ZTT 190 as a comparison to see if it is anything obvious, but no luck, very frustrating!

Flying Silver
19-03-2012, 04:39 PM
I think this is a know 'issue' (if not common) on our cars. I dont know the solution, but am sure someone who does will be along shortly....

Herman
19-03-2012, 05:09 PM
I think this is a know 'issue' (if not common) on our cars. I dont know the solution, but am sure someone who does will be along shortly....

But not in the public section please.

Please PM Tim or ColinE if you need more information

Tim
19-03-2012, 09:03 PM
E-mail sent Mike

Big Frank
26-03-2012, 12:39 PM
Hi there,

I've been there three times with both my ZT260 and the ZT-T190. If you have not got it fixed with the above 'PM's then let me know and I'll give you some directions on how to get the bonnet open and how to cure the problem. It all relates to the crap arrangements MG/Rover used two connect one cable to two!

Regards
Big Frank.