parts for sale

[jimmie]

i have the following parts for sale but i need to get buyers for most or all before i sell
zytec racing shell and all panels new £600
vhs handling kit new used for about three hundred miles£700
sean hyland 5 litre 32 valve engine new inc new ecu and wiring loom £2500
tremec 5 spd box new£400
rear stuff up £1200
front stuff up £600
or group buy for 5k and split up in england buyer collects
regards jim biggam elderslie scotland
ps ive paid well over 7k for the parts

[Merl]

If we get enough takers I would put my name down for the vhs kit

[colintf]

front and rear stuff ups please :thumb

No idea where I'll store them, but too good to turn down - ironic really as I believe you bought these from AE Wilcox just up the road from me??

group buy sounds a good idea if there's enough interest.

[mgnumber49]

I will buy the garbox please Many Thanks Karl

[Cribbit]

Wow, you have to be quick round here don't you...

:(

[Merl]

Aye you do!

What were you after? the gear box?

[Cribbit]

I was thinking stuff-ups actually. I have a front subframe, but the rest of the stuff up would be useful for the front, as well as the complete rear one for the race car. I may well be better off to get a salvage 260 anyway, and I wasn't planning on spending anymore money on parts just yet, so i'm not bothered that there's other interest.

The engine is a tempting idea to look into, but i hear a divorse can be expensive, so I'll (probably) refrain!

Chris

[jimmie]

all i need guys is the engine to sell and ill sell separately or the lot for a group buy
ill not let yous down

[colintf]

thanks Jimmie :thumb

[Merl]

Would it be worth advertising the engine on a mustang forum?

[Cribbit]

all i need guys is the engine to sell and ill sell separately or the lot for a group buy
ill not let yous down

Ok, so tell me about this engine. What's its history, condition, age...

What does it come with? Are we talking about a ready to run engine that's part of the front stuff up?

Has it been stored for a while? Has it be been stored properly?

[jimmie]

chris the engine is an ex factory mg svr engine with the heads teaped 033 dreadnought have told me its one of the original sean hyland engines without the valve angles changed for the svr as requested by mgr this meaning it has to be run on higher octane fuel but hasnt got the 15/20 hp dropp as caused by the head work the engine with the right headers will be 400 bhp ish and is complete and been stored properly and is not part of the front axle assemblie
regards jimmie biggam,where else could you get a new 400 bhp engine for 2.5 k

[pider100]

Jimmie, I don't suppose you've got a spare throttle cable lying about the garage? I've passed by a few times going to the Saints matches, and keep saying to my son, ' must pop in and say hello', but there's always something to rush back home for.

[ColinE]

a spare throttle cable ..............

Available to order from Xpart - Rimmers will show no stock as it's special order item

[pider100]

Yeah Thanks Colin. I mailed them yesterday infact. Just thought if Jimmie had one spare, I'd be as well paying him for one.

[jimmie]

tam ive been so busy opening my new place at george street ive not had time to come on but im sorry i dont have a spare throttle cable but im glad your sorted
if i dont sell my project soon it looks as if it will come to george street ,but as its smaller than well street i was trying move it on to give me more space
cheers jimmie biggam

[pider100]

No problem jimmie. I will make a point of popping in to see you when I'm back home. So you are moving lock/stock and all to George st? When do you expect to be flitted then?

[re5rotary]

Hi this may sound like a dum question but would this motor drop straight into a standard road car and run? How much tie up is there between the engine ecu and the rest of the car. Im just a newbie regards terry

[Herman]

Hi this may sound like a dum question but would this motor drop straight into a standard road car and run? How much tie up is there between the engine ecu and the rest of the car. Im just a newbie regards terry

No it won't. Not enough space for a 32V. Trying to link it to the rest of the car via the Gateway ECU will be difficult as well.

[Merl]

Anything is possible with know how and money... but yeah doesn't fit straight in and generally you will loose the heater matrix etc... If you were going to have a track day car only then this would be a good purchase.

I am definitely still up for the VHS Kit.

Going away for a week though tomorrow night so might not be on here as not sure if the resort has internet. So yeah hopefully I can get on if we have movement but if not I will be back online Sunday 8th April.

[jimmie]

hi guys all you that have shown interest might be in luck i think i may have a buyer for the engine please send me pm`s so we can tie up the sales for the parts jimmie biggam

[colintf]

thats good news Jimmie, need to sort storage and transportation out now :cool:

[colintf]

I believe that all of us buying are members on here.

If so it's worth us considering the group buy option.

The VHS kit then become £648.15
The Engine becomes £2314.81
The Gearbox becomes £370.37
The Stuffups become £1666.67

(based on the percentage 5000/5400 ie group buy price / individual buy prices)

But what would we do with the Body shell???
I wonder if the owner down under would be interested???

If we find a buyer for that the items become cheaper still

VHS approx £583.33
Engine approx £2083.33
Gearbox approx £333.33
Stuffups approx £1500
Bodushell approx £500

:cool:

[Merl]

I was thinking the same Colin but don't really have the space fora body shell... Well I do but only as a temp measure as it isn't under cover and not secure as such but is out of sight and could lock it up until a buyer could be found.

Though have to incorporate the extra shipping costs as well....

[tomcat22]

here is the shell for your engine, jimmie!
http://www.ebay.co.uk/itm/320883055066

[jenksman]

There is an SV for sale on Ebay
It is a "track" car currently minus engine
Cheap at under 10k and with Jimmie's engine/gearbox would be a nice project for someone
Dave

[colintf]

There is an SV for sale on Ebay
It is a "track" car currently minus engine
Cheap at under 10k and with Jimmie's engine/gearbox would be a nice project for someone
Dave

believed to be the first roadgoing SV :cool:

[ColinE]

There is an SV for sale on Ebay
It is a "track" car currently minus engine
Cheap at under 10k and with Jimmie's engine/gearbox would be a nice project for someone
Dave


Sorry had to go look up cheap in a dictionary

[Merl]

Sorry had to go look up cheap in a dictionary

It is all relative! and if the relative in question is the wife then whatever you tell her it won't be cheap in her eyes ;)

[dixiejon]

jim
where r u.
i,m in Polmont nr Falkirk
my car is V8 conn se a vin No SARRXZLGJ5D000634.
bought it at head office birmingham 2005
am looking for anti-roll bar linkage
can u provide any heads up info ?

[Herman]

jim
where r u.
i,m in Polmont nr Falkirk
my car is V8 conn se a vin No SARRXZLGJ5D000634.
bought it at head office birmingham 2005
am looking for anti-roll bar linkage
can u provide any heads up info ?

Posted info in you're original post